User Manual of Network Fisheye Camera
88
sharpness, etc.
Steps:
1. Enter the Display Settings interface:
Configuration > Image> Display Settings
2. Set the image parameters of the camera.
Note: In order to guarantee the image quality in the different illumination, it
provides two sets of parameters for user to configure.
Day/Night Auto-switch
Figure 6-42 Display Settings of Day/night Auto-switch
Image Adjustment
Brightness describes bright of the image, which ranges from 1 to 100, and
the default value is 50.
Contrast describes the contrast of the image, which ranges from 1 to 100,
and the default value is 50.
Saturation describes the colorfulness of the image color, which ranges from
1 to 100, and the default value is 50.
Sharpness describes the edge contrast of the image, which ranges from 1 to
100, and the default value is 50.
Exposure Settings
To Next Page
Loading...
