User Manual of Network Fisheye Camera
75
Figure 6-30 HTTPS Settings
2. Check the checkbox of Enable to enable the function.
3. Install a certificate. There are three ways of installation available, choose one
according to your actual need.
Create a self-signed certificate.
(1) Select Create Self-signed Certificate as the installation method.
(2) Click Create button to enter the creation interface.
Figure 6-31 Create Self-signed Certificate
(3) Enter the country, host name/IP, validity and other information.
(4) Click OK to save the settings.
Note: If you already had a certificate installed, the Create Self-signed
Certificate is grayed out.
Signed certificate is available, start the installation directly.
If you already have had a signed certificate, select this installation method,
To Next Page
Loading...
