HIKVISION DS-2CD3066G2-IS User Manual

The device uploads the people change informaon if there is any change in the set rule
region.
Congeson Level Upload
The device uploads the congeson informaon when there is any change of congeson level
in the set rule region.
Density Level
Number of People
The range for each level by
inpung the lower limit of the number of people in the set
rule region.
Custom Name
The name of the level.
Note
●
Set the Number of People before the Custom Name.
●
Up to three levels can be congured. The density increases from level 1 to level 3.
6.
Set arming schedule. See Set Arming Schedule .
7.
Set linkage method. See Linkage Method Sengs .
8.
Click Save.
9.
Oponal: Set text overlay. For detailed sengs, refer to Overlay and Capture .
10.
Oponal: View version and set ltering condion. For detailed sengs, refer to Advanced
Sengs .
Set People
Excepon Detecon
This funcon detects the people number in the set rule region and an alarm is triggered when the
situaon meets the alarm-triggering condion.
Before You Start
●
Go to VCA → Select Applicaon , select People Management and click Next to enable the
funcon.
●
For the device supporng HEOP, go to VCA to import and enable People Management.
Steps
1.
Go to VCA → Set Applicaon → People Management → People Number Management → Rule .
2.
Click Add to add a rule and set its name.
3.
Set a rule.
People Number OSD
It displays the
real-me people number in the live view window. You can drag the mouse to
adjust the OSD window locaon.
Alarm Times Per Excepon
Network Camera User Manual
88

HIKVISION DS-2CD3066G2-IS Specifications

General

Brand	HIKVISION
Model	DS-2CD3066G2-IS
Category	Security Camera
Language	English