Wireless Router • User Guide
42
Change the WiFi name and WiFi password
The router supports a 2.4 GHz WiFi network.
Assume that you want to change the WiFi name and password to John_Doe_2.4GHz and
Hikvision+Wireless24. The network adopts WPA/WPA2-PSK Mixed as the encryption type.
Procedures:
Launch a web browser on a device connected to the router and visit
http://hikvisionwifi.local to log in to the web UI of the router.
Navigate to Route Settings > Wireless Settings > WiFi Name and Password.
Change the parameters of the WiFi network.
1) Change the WiFi Name of the WiFi network, which is John_Doe_2.4GHz in this example.
2) Select an Encryption Mode, which is WPA/WPA2-PSK Mixed in this example.
3) Change the WiFi Password of the WiFi network, which is Hikvision+Wireless24 in this
example.
Click Save at the bottom of the page.
Change WiFi name and password
When completing the configurations, you can connect your wireless devices to the WiFi networks
of the router to access the internet.
To Next Page
Loading...
