HIKVISION DS-7100NI-Q1/P Series - Page 66

Import/Export IP Camera Conguraon File
The informaon of added network camera can be generated into an excel le and exported to the
local device for backup, including the IP address, port, password of admin, etc. And the exported
le can be edited on your computer, like adding or deleng the content, and copy the seng to
other devices by imporng the excel le to it.
Before You Start
Connect a backup device, such as a USB
ash drive, to your video recorder.
Steps
1. Go to Conguraon → Camera → Camera .
2. Click More.
3. Click Export/Import to export/import
conguraon les to the connected backup device.
4. Set the storage device and folder path.
5. Click Export/Import.
What to do next
Aer the imporng process is completed, you must restart the video recorder.
Advanced
Sengs
Steps
1. Go to Conguraon → Camera → Camera .
2. Click More.
3.
Congure the parameters as your desire.
H.265 Auto Switch Conguraon
If you enable the opon, the device will automacally switch to H.265 stream for the network
camera (which supports H.265 video format) for the inial access.
Upgrade
Upgrade the added network cameras.
Export/Import
The informaon of added network camera can be generated into an excel le and exported to
the local device for backup, including the IP address, port, password of admin, etc. And the
exported
le can be edited on your computer, like adding or deleng the content, and
copying the sengs to other devices by imporng the excel le to it.
Protocol
To connect the network cameras which are not congured with the standard protocols, you
can
congure the customized protocols for them. The system provides 16 customized
protocols.
Camera Acvaon Password Sengs
Network Video Recorder User Manual
52