Digital Video Recorder User Manual
34
Figure 2. 11 Advanced Network Parameters
6. Click Next button after configuring the advanced network parameters, which will take you to the HDD
Management window, shown in Figure 2.12.
Figure 2. 12 HDD Management
7. To initialize the HDD, click the Init button. Initialization will remove all the data saved in the HDD.
8. Click Next to enter the IP Camera Management window.
9. Add the IP camera.
1) Click Search to search the online IP Camera. The Security status shows whether it is active or inactive.
Before adding the camera, make sure the IP camera to be added is in active status. If the camera is in
inactive status, you can click the inactive icon of the camera to set the password to activate it. You can
also select multiple cameras from the list and click the One-touch Activate to activate the cameras in
batch.
2) Click the Add to add the camera.
To Next Page
Loading...
Need help?
General