HIKVISION DS-7200 Series

User Manual of DS-7200/7300/8100 Series DVR
158
9.1 Configuring General Settings
Purpose:
Network settings must be properly configured before you operate device over network.
Steps (for DS-7200, DS-7300 and DS-8104/8108):
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the General tab.
Figure 9. 1 General Network Settings of DS-7204/7208/7216
Figure 9. 2 General Network Settings of DS-7224/7232 and DS-7300
The DS-7204/7208/7216 models provide one 10M/100Mbps self-adaptive network interface, the
DS-7224/7232, DS-7300 and DS-8104/8108 models provide one10M/100M/1000Mbps self-adaptive
network interface.
3. In the General Settings interface:
You can configure the following settings: NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS
Server.