HIKVISION DS-7200 Series

User Manual of DS-7200/7300/8100 Series DVR
91
5.4 Configuring Alarm Triggered Record
This section is available for DS-7224/7332, DS-7300, DS-8100 and HDVR models only.
Purpose:
Follow the procedure to configure alarm triggered recording.
Steps:
1. Enter the Alarm setting interface.
Menu> Configuration> Alarm
Figure 5. 21 Alarm Settings
2. Click Alarm Input tab.
Figure 5. 22 Alarm Settings- Alarm Input
1) Select Alarm Input No. and configure alarm parameters.
2) Choose N.O (normally open) or N.C (normally closed) for alarm type.
3) Check checkbox to enable the alarm input.
4) Click to set the alarm settings method.