User Manual of DS-7200/7300/8100 Series DVR
74
Figure 4. 23 Control Panel-Call Pattern
4.2.2 Configuring Linear Scan
Customizing Linear Scan
Purpose:
Two limit points can be set for the view of the PTZ camera, and then the PTZ camera can horizontally auto
scan between the two predefined limits.
This function requires the support of the connected PTZ camera.
Steps:
1. Enter the PTZ Settings interface.
Menu > Camera > PTZ
Figure 4. 24 PTZ Settings-Customize Linear Scan
2. Select the camera for PTZ setting from the drop-down list.
To Next Page
Loading...
