User Manual of DS-7200/7300/8100 Series DVR
163
Figure 9. 10 DynDNS Settings Interface
• PeanutHull: Enter User Name and Password obtained from the PeanutHull website.
Figure 9. 11 Peanut Hull Settings Interface
• NO-IP:
Enter the account information in the corresponding fields. Refer to the DynDNS settings.
1) Enter Server Address for NO-IP.
2) In the Device Domain Name text field, enter the domain obtained from the NO-IP website
(www.no-ip.com).
3) Enter the User Name and Password registered in the NO-IP website.
Figure 9. 12 NO-IP Settings Interface
• HiDDNS: You need to enter the Server Address and Device Domain Name for HiDDNS, and
other fields are read-only.
1) Enter the Server Address of the HiDDNS server: www.hik-online.com.
2) Enter the Device Domain Name. You can register the alias of the device domain name in
the HiDDNS server first and then enter the alias to the Device Domain Name in the DVR;
you can also enter the domain name directly on the DVR to create a new one.
If a new alias of the device domain name is defined in the DVR, it will replace the old one
registered on the server.
To Next Page
Loading...
Need help?
General