HIKVISION DS-7200 Series User Manual

User Manual of DS-7200/7300/8100 Series DVR
52
Figure 3. 6 Image Settings
3. Adjust the image parameters including the brightness, contrast, saturation, hue, sharpness level and
denoising level by moving the sliding bar or increasing/decreasing the value.
The adjustable value range is 0~255 for the brightness, contrast, saturation and hue, 0~15 for the sharpness
level and 0~5 for the denoising level.
4. Copy image parameters.
You can click the Copy button to enter the Copy to interface to copy the image parameters of the
current camera to other analog camera (s)
You can click the Restore button to restore the current image settings to default parameters.
Task2: Configure image settings for the IP camera
Steps:
1. On the Image Settings menu, you can set the image parameters including the brightness, contrast,
saturation and hue in the Custom mode.
Figure 3. 7 Image Settings- Customize
2. Click OK to save the settings.

HIKVISION DS-7200 Series Specifications

General

Brand	HIKVISION
Model	DS-7200 Series
Category	DVR
Language	English