User Manual of DS-7200/7300/8100 Series DVR
72
1. Click the button in the lower-right corner of the PTZ setting interface;
or press the PTZ button on the front panel;
or click the PTZ Control icon in the quick setting toolbar during the live view process,
or click PTZ Control on the right-click menu to open the PTZ control panel in live view mode.
2. Select the PTZ camera from the drop-down list for control.
3. Click the icon on the panel and then click the General tab to enter the general PTZ control
interface.
4. Select the patrol from the corresponding drop-down list, and then click the Call Patrol button to start
the patrol.
5. To stop the patrol, you can click the button Stop Patrol on the panel.
Figure 4. 21 Control Panel-Call Patrol
Customizing Patterns
Purpose:
A pattern is a memorized, repeating series of pan, tilt, zoom, and preset functions.
Steps:
1. Enter the PTZ Settings interface.
Menu > Camera > PTZ
To Next Page
Loading...
Need help?
General