User Manual of DS-7200/7300/8100 Series DVR
84
The VCA recording type is supported by the Smart DVR/HDVR series only.
The Alarm, Motion/Alarm and Motion & Alarm recording types are supported by the
DS-7224/7232, DS-7300 and DS-8100 series only.
To enable Motion triggered recording, you must configure the motion detection settings as well. For detailed
information, refer to Chapter 8.1 and Chapter 8.2.
Figure 5. 9 Edit Schedule
5) To arrange other schedule, leave the All Day checkbox blank and set the Start/End time and Type.
Up to 8 periods can be configured for each day. And the time periods can’t be overlapped each other.
Repeat the above steps2)-5) to schedule recording for other days in the week. If the schedule can also be set to
other days, click Copy.
Figure 5. 10 Copy Schedule to Other Days
The Holiday option is available in the Schedule dropdown list when you have enabled holiday schedule in
Holiday Settings. Refer to Chapter 5.6 Configuring Holiday Record.
To Next Page
Loading...
Need help?
General