EasyManuals Logo

HIKVISION DS-7608NI-I2/8P User Manual

HIKVISION DS-7608NI-I2/8P
324 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Network Video Recorder User Manual
9
Network Functions
Two self-adaptive 10M/100M/1000Mbps network interfaces for DS-9600NI, DS-8600NI,
DS-7700NI-I4 and DS-7700NI-K4, and the multi-address and network fault tolerance working
modes are configurable.
One self-adaptive 10M/100M/1000Mbps network interface for DS-7600NI-K2/I2 (/P),
DS-7700NI-I4/P and DS-7700NI-K4/P.
One self-adaptive 10M/100Mbps network interface for DS-7600NI-K1 (/P).
Four independent PoE network interfaces are provided for /4P models, eight independent PoE
network interfaces for the /8P models, and sixteen independent PoE network interfaces for the
/16P models.
Long distance (100-300 m) network transmission via PoE (for /P models).
IPv6 is supported.
TCP/IP protocol, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, and iSCSI are supported.
TCP, UDP and RTP for unicast.
Auto/Manual port mapping by UPnP
TM
.
Support access by Hik-Connect.
Remote web browser access by HTTPS ensures high security.
The ANR (Automatic Network Replenishment) function is supported, it enables the IP camera
save the recording files in the local storage when the network is disconnected, and
synchronizes the files to the NVR when the network is resumed.
Remote reverse playback via RTSP.
Supports accessing by the platform via ONVIF.
Remote search, playback, download, locking and unlocking of the record files, and support
downloading files broken transfer resume.
Remote parameters setup; remote import/export of device parameters.
Remote viewing of the device status, system logs and alarm status.
Remote keyboard operation.
Remote HDD formatting and program upgrading.
Remote system restart and shutdown.
RS-232, RS-485 transparent channel transmission.
Alarm and exception information can be sent to the remote host
Remotely start/stop recording.
Remotely start/stop alarm output.
Remote PTZ control.
Remote JPEG capture.
Virtual host function is provided to get access and manage the IP camera directly.
Two-way audio and voice broadcasting.

Table of Contents

Other manuals for HIKVISION DS-7608NI-I2/8P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7608NI-I2/8P and is the answer not in the manual?

HIKVISION DS-7608NI-I2/8P Specifications

General IconGeneral
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)15 W
Total Power over Ethernet (PoE) budget120 W
Networking standardsIEEE 802.3af, IEEE 802.3at
USB 2.0 ports quantity1
Ethernet LAN data rates10, 100, 1000 Mbit/s
Power over Ethernet (PoE)Yes
Ethernet LAN (RJ-45) ports9
Supported network protocolsTCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS
Power over Ethernet (PoE) ports quantity8
Number of fans1 fan(s)
Input bandwidth80 Mbit/s
Number of users64 user(s)
Output bandwidth256 Mbit/s
Maximum resolution3840 x 2160 pixels
Alarm input channels4
Video input channels8 channels
Video formats supportedH.264, H.264+, H.265, H.265+, MPEG4
Still image resolution(s)3840 x 2160, 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 720, 1024 x 768
Analog signal format systemNTSC, PAL
Resolution at capture speed1920x1080@60fps
HDD capacity0 GB
HDD interfaceSerial ATA
Maximum storage capacity12 TB
Number of HDDs installed0
Number of HDDs supported2
CertificationFCC Part 15 Subpart B, ANSI C63.4-2014 CE EN 55032:2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4
Product colorBlack, Silver
Rack capacity1U
Wi-FiNo
Weight and Dimensions IconWeight and Dimensions
Depth315 mm
Width385 mm
Height52 mm
Weight3000 g

Related product manuals