Network Video Recorder User Manual
193
11.6 Advanced Search
The DS-7600/7700/8600/9600-I (/P) series NVR supports the advanced search for
fire/ship/temperature/temperature difference detection triggered alarm and the recorded video
files and pictures.
Before you start
To get the smart search result, the corresponding fire/ship temperature/temperature difference
type must be enabled and configured on the connected thermal network camera (Configuration >
Advanced Configuration> Smart Event). Please refer to the user manual of the thermal network
camera for details.
Step 1 Enter the Advanced Search interface.
Menu > VCA Search > Advanced Search
Step 2 Select the camera (s) for the advanced search.
Figure 11-9 Advanced Search
Step 3 Specify the start time and end time for searching the thermal imaging detection results.
Step 4 Select the type to fire detection, ship detection, temperature detection and temperature
difference detection.
Step 5 Click Search to start searching. The search results are displayed in list or in chart.
To Next Page
Loading...
