Network Video Recorder User Manual
197
12.2 Configuring Advanced Settings
12.2.1 Configuring Hik-Connect
Purpose
Hik-Connect enables the mobile phone application and the service platform page
(www.hik-connect.com) to access and manage your connected NVR, providing a convenient
remote access to the surveillance system.
The Hik-Connect can be enabled via operation on SADP software, GUI and Web browser. We
introduce the operation steps on GUI in this section.
Step 1 Enter the Network Settings interface.
Menu > Configuration > Network
Step 2 Select the Platform Access tab to enter the Hik-Connect Settings interface.
Figure 12-2 Hik-Connect Settings
Step 3 Check the Enable checkbox to activate the function. The Service Terms interface pops up as
below.
To Next Page
Loading...
