HIKVISION DS-9600 Series - Detecting Video Loss Alarm

User Manual of DS-9600/8600/7700/7600 Series NVR
139
8.3 Detecting Video Loss Alarm
Purpose:
Detect video loss of a channel and take alarm response action(s).
Steps:
1. Enter Video Loss interface of Camera Management and select a channel you want to detect.
Menu> Camera> Video Loss
Figure 8. 9 Video Loss Setup Interface
2. Set up handling method of video loss.
Check the checkbox of “Enable Video Loss Alarm”, and click Handling button to set up
handling method of video loss.
Figure 8. 10 Set Handling Method of Video Loss
3. Set up arming schedule of the channel.
Select Arming Schedule tab to set the channel’s arming schedule.
Choose one day of a week and up to eight time periods can be set within each day.