HIKVISION DS-9600 Series - Playing Back by Event Search

User Manual of DS-9600/8600/7700/7600 Series NVR
98
tag
manageme
nt
down
/
Pause reverse
play/Reverse play/
Single-frame
reverse play
/
Pause
play/Play/Single-fr
ame play
Stop
Speed up
Previous file
Next file
Video
search
Exit
Hide toolbar
Progress bar
Video type
bar
Note:
1. Playback progress bar: use the mouse to click any point of the progress bar or drag the progress
bar to locate special frames.
2. About video type bar: represents normal recording (manual or schedule); represents event
recording (motion, alarm, motion | alarm, motion & alarm).
6.1.4 Playing Back by Event Search
Purpose:
Play back record files on one or several channels searched out by restricting event type (e.g. alarm
input and motion detection). Channel switch is supported.
Steps:
1. Enter the Event Search interface.
Menu>Playback>Event
2. Select Alarm Input as the event type.
3. Click Search button to enter the Search Result interface.
Figure 6. 16 Video Search by Alarm Input
If you want to play back recorded files associated with motion detection, choose Motion
as event type and click Search button to enter the Search Result interface.