User Manual of DS-9600/8600/7700/7600 Series NVR
86
5.9 Files Protection
Purpose:
You can lock the recorded files or set the HDD property to Read-only to protect the record files
from being overwritten.
Protect file by locking the record files:
Steps:
1. Enter Playback setting interface.
Menu> Playback
Figure 5. 30 Playback
2. Select the channels you want to investigate by checking the checkbox to .
3. Configure the record type, file type start/end time.
4. Click Search to show the results.
Figure 5. 31 Playback- Search Result
5. Protect the record files.
1) Find the record files you want to protect, and then click the icon which will
turn to , indicating that the file is locked.
Note: The record files of which the recording is still not completed can’t be locked.
To Next Page
Loading...
