User Manual of DS-9600/8600/7700/7600 Series NVR
189
11.2 Managing Network HDD
Purpose:
You can add the allocated NAS or disk of IP SAN to NVR, and use it as network HDD.
Steps:
1. Enter the HDD Information interface.
Menu > HDD>General.
Figure 11. 5 HDD Information Interface
2. Click the Add button to enter the Add NetHDD interface, as shown in Figure 11. 6.
Figure 11. 6 HDD Information Interface
3. Add the allocated NetHDD.
4. Select the type to NAS or IP SAN.
5. Configure the NAS or IP SAN settings.
• Add NAS disk:
To Next Page
Loading...
