HIKVISION DS-9600 Series - Editing IP Cameras Connected to the Extra Network Interfaces; DS-7600 NI-SE;N Series NVR)

User Manual of DS-9600/8600/7700/7600 Series NVR
44
in the Network Configuration interface, see Chapter 9.1 Configuring General Settings for
detailed information.
2.3.4 Editing IP cameras connected to the extra network
interfaces (Only DS-7600NI-SE/N series NVR)
For DS-7600NI-SE/N series NVR, the extra network interfaces provide a built-in switch with
plug-and-play function.
Example:
As for DS-7608NI-SE/N NVR, when you want to connect 2 online cameras and connect 6
network cameras via built-in switch interfaces, you must disable 2 built-in switch interface in the
Edit IP camera panel.
To add Cameras for NVR via built-in switch interfaces:
Before you start:
Connect the network cameras via the built-in switch interfaces.
Steps:
1. Enter the Camera Management interface.
Main menu> Camera> Camera
You can see the connected cameras are listed.
Figure 2. 20 List of Connected Cameras
Note: The cameras connecting to the built-in switch interface cannot be deleted in this menu.
2. Click the Edit button.