HIKVISION DS-9600 Series User Manual

User Manual of DS-9600/8600/7700/7600 Series NVR
177
Note: At least one available physical disk should exist for rebuilding the array.
Figure 10. 21 Rebuild Array Interface
4. Select the available physical disk and click to confirm to rebuild the array.
5. The “Do not unplug the physical disk when it is under rebuilding” message box pops up. Click to
start rebuilding.
6. You can enter the Array Settings interface and Virtual Disk interface to view the rebuilding status.
7. After rebuilding successfully, the array and virtual disk will restore to Functional.
Note: It is recommended to enable the Auto-rebuild function and set the hot spare disk for automatically rebuilding
the array.

HIKVISION DS-9600 Series Specifications

General

Brand	HIKVISION
Model	DS-9600 Series
Category	Network Hardware
Language	English