User Manual of DS-9600/8600/7700/7600 Series NVR
226
Figure 14. 8 User Permission Settings Interface
6. Set the operating permission of Local Configuration, Remote Configuration and Camera
Configuration for the user.
Local Configuration
• Local Log Search: Searching and viewing logs and system information of NVR.
• Local Parameters Settings: Configuring parameters, restoring factory default
parameters and importing/exporting configuration files.
• Local Camera Management: The adding, deleting and editing of IP cameras.
• Local Advanced Operation: Operating HDD management (initializing HDD,
setting HDD property), upgrading system firmware, clearing I/O alarm output.
• Local Shutdown Reboot: Shutting down or rebooting the NVR.
Remote Configuration
• Remote Log Search: Remotely viewing logs that are saved on the NVR.
• Remote Parameters Settings: Remotely configuring parameters, restoring factory
default parameters and importing/exporting configuration files.
• Remote Camera Management: Remote adding, deleting and editing of the IP
cameras.
• Remote Serial Port Control: Configuring settings for RS-232 and RS-485 ports.
• Remote Video Output Control: Sending remote button control signal.
• Two-Way Audio: Realizing two-way radio between the remote client and the
NVR.
• Remote Alarm Control: Remotely arming (notify alarm and exception message to
the remote client) and controlling the alarm output.
• Remote Advanced Operation: Remotely operating HDD management (initializing
HDD, setting HDD property), upgrading system firmware, clearing I/O alarm
output.
• Remote Shutdown/Reboot: Remotely shutting down or rebooting the NVR.
Camera Configuration
• Remote Live View: Remotely viewing live video of the selected camera (s).
• Local Manual Operation: Locally starting/stopping manual recording, picture
capturing and alarm output of the selected camera (s).
• Remote Manual Operation: Remotely starting/stopping manual recording, picture
capturing and alarm output of the selected camera (s).
To Next Page
Loading...
