HIKVISION DS-K1T804AMF - Attendance Statistics

4.
Set other condions, including department, name, person ID
and aendance status.
5.
Click Calculate.
Note
It can only calculate the aendance data within three months.
6.
Perform one of the following
operaons.
Correct Check-
in/out
Click Correct Check-in/out to add check-
in/out correcon.
Select Items to
Display
Click , or right-click the tles of dierent
items to select items to be displayed in
the report.
Generate
Report
Click Report to generate the aendance
report.
Export Report Click Export to export aendance data to
local PC.
Note
The exported details are saved in .CSV
format.
8.9.8 Aendance Stascs
You can check the original aendance record, generate and
export the
aendance report based on the calculated aendance
data.
Get an Overview of Employees' Aendance Data
You can search and view the employee's aendance records on
the client, including
aendance me, aendance status, check
point, etc.
Before You Start
•
You should add organizaons and persons in Person module
and the persons have swiped cards. For details, refer to Person
Management.
•
Calculate the
aendance data.
Note
•
The client will automacally calculate the previous day's
aendance data at 1:00 am on the next day.
•
Keep the client running at 1:00 am or it cannot calculate
the previous day's aendance data automacally. If not
calculated
automacally, you can calculate the aendance
data manually. For details, refer to Manually Calculate
Aendance Data.
Steps
1.
Enter the Time & Aendance module.
2.
Click
Aendance Stascs → Aendance Record .
3.
Set the
aendance start me and end me that you want to
search.
4.
Set other search
condions, including department, name, and
person ID.
93