HIKVISION DS-K1T804AMF - 7.10 Basic Settings

All parameters, excluding the communicaon parameters,
the remote user management, and events, will restore to
the factory parameters.
4.
Conrm sengs in the prompt page and the device starts
restoring.
7.10.6 Log Query
You can search the authencaon logs via the user's employee ID,
name, or card.
Steps
1.
On the Home page, move the cursor and select Log.
Figure 7-34 Log Query Page
2.
Enter the employee ID, the user name, the card No., the start
me, and the end me.
3.
Press OKto start searching.
The result will be displayed on the page.
7.10.7 View System
Informaon
View system informaon, including system capacity and device
informaon.
View System Capacity
Move the cursor and select Info. → Capacity to enter the
Capacity page.
You can view the added device user number, card number, and
ngerprint number.
Note
Parts of device models supports display the ngerprint capacity.
Figure 7-35 Capacity Page
View Device Informaon
Move the cursor and select Info. → Device to enter the Device
page.
You can view the device name, the serial No., the MAC address,
the rmware, and the producon date.
38