HIKVISION DS-K1T804AMF - Search Historical Events

Parameters in the user manual of client
soware for details.
8.8.3 Search Historical Events
In the Event Search module of the event center page, you can
search the historical events via me, device type, and other
condions according to the specied device type, and then
process the events.
Before You Start
Enable receiving events from devices before the client can receive
event
informaon from the device,see Enable Receiving Events
from Devices for details.
Steps
1.
Click Event Center → Event Search to enter the event search
page.
Figure 8-8 Search History Event
2.
Set the lter condions to display the required events only.
Time
The client me when the event starts.
Search by
Group: Search the events occurred on the resources in the
selected group.
Device: Search the events occurred on the selected device.
Device Type
The type of device that occurred the event.
All
All the device types, and you can set the following lter
condions: group, priority, and status.
Video Intercom
For the events of video intercom, you need to select
searching scope: All Record and Only Unlocking.
•
All Records: You can
lter the events from all the video
intercom events, and you need to set the following
lter
condions: device, priority, status.
•
Only Unlocking: You can
lter the events from all the video
intercom unlocking events, and you need to set the
following
lter condions: device, unlocking type.
Access Control
For the events of access control, you can set the following
lter condions: device, priority, status, event type, card
reader type, person name, card no., organizaon.
77