HIKVISION DS-K1T804AMF - Set Holiday Group

Parameter Descripon
use mulple authencaon
modes.
•
If you adopt mulple
authencaon modes, you
should authencate other
methods before authencang
face.
Sub Reader Auth
Select the card reader's
authencaon mode.
Door Contact
You can select "Remain Open" or
"Remain Closed" according to your
actual needs. By default, it is
Remain Closed.
Open Duraon
Set the door unlocking duraon. If
the door is not opened for the set
me, the door will be locked.
Available door locked me range: 1
to 255s.
Door-Open
Timeout Alarm
Congure the maximum me
duraon for door opening. If the
door-open me has exceeded the
congured value, it will trigger an
alarm.
Auth Times
Exceeded Alarm
Congure the maximum mes for
authencaon.
Super Password
Set the device super password.
Aer saving the sengs, you can
input the super password in the
inial interface to access the door.
7.6.3 Set Holiday Group
Congure the access control system holiday schedule. The door
can be open during the holiday.
Steps
1.
Move the cursor and select ACS → Holiday to enter the holiday
sengs page.
Figure 7-8 Holiday Group List
2.
Move the cursor and select New. Set the holiday group's name.
21