HIKVISION DS-K1T804AMF - 7.8.5 Shift Schedule

Note
•
The supported USB ash drive format is FAT32.
•
The USB ash drive memory should be from 1G to 32G.
Make sure the free space of the USB ash drive is more than
512 M.
2.
Move the cursor and select Report. Press OK to enter the
Report page.
Figure 7-28 Report Page
3.
Select a report to export.
-
When
exporng aendance record, aendance report, and
abnormal
aendance record, you should enter the device
No. aendance start date and end date.
Note
The device No. is for dierenang the reports of dierent
devices.
-
When selecng Aendance Management Schedule, shi
sengs table, normal shi schedule table and the man-hour
shi schedule table will be exported.
Note
For details about the exported tables descripons, see
Aendance Report Table.
The exported table will be saved in the USB ash drive in Excel
format.
7.9 Data Transfer
You can export the access control parameters (ngerprint and
user informaon) and the aendance data (data aer
aendance, card swiping data for instance). You can also import
the access control parameters from the USB
ash drive.
Export Data
Move the cursor and select Transfer → Export to enter the Export
page.
Figure 7-29 Export Data Page
33