HIKVISION DS-K1T804AMF - Manage System Data; Set System Parameters

Select to enable or disable the DST. When the DST is
enabled, you can set the DST bias me, the start me and
the end me.
•
DST Bias: You can select 30min, 60min, 90min and 120min.
•
Start: Set the start
me of the DST.
•
End: Set the end me of the DST.
3.
Press ESC and select Yes to save the sengs and exit the page.
7.10.2 Manage System Data
Delete the saved event, aendance data, user data, or
permission.
Steps
1.
Move the cursor and select System → Data .
2.
Press OK to enter the Data page.
Figure 7-31 Data Page
3.
Select an item and press OK to delete.
Delete Event Only
Delete all recorded events in the device.
Delete Aendance Data Only
Delete all aendance data in the device.
Delete User Only
Delete all user data in the device, including the aendance
records.
Clear Permission
Clear the admin management permission. The admin will
turn to the normal user. The user will not be deleted.
7.10.3 Set System Parameters
Set the system parameters, including the device me format, the
keypad sound, the voice prompt, the volume, the sleeping mode,
the
aendance record prompt the authencaon mode, record
delete
funcon, and the language.
Steps
1.
Move the cursor and select System → System .
2.
Press OK to enter the System page.
35