HIKVISION DS-K1T804AMF - Basic Settings; Set Time

Plug a USB ash drive in the device USB interface, and select
Export ACS Para. or Export Aendance Data, enter the key, and
press OK. The data will be exported to the USB ash drive.
Note
•
The supported USB ash drive format is FAT32.
•
The USB ash drive memory should be from 1G to 32G. Make
sure the free space of the USB ash drive should be more than
512 M.
•
Remember the key property, and you should use the key to
import the data to another device.
Import Data
Move the cursor and select Transfer → Import to enter the
Import page. Select Import ACS Para, enter the key, and press OK.
The system will gain access control parameters from the USB
ash
drive.
Note
•
The supported USB ash drive format is FAT32.
•
The le for imporng should be in the root directory.
7.10 Basic Sengs
7.10.1 Set Time
Set the device me and DST.
Steps
1.
Move the cursor and select Time in the main page and press
OK to enter the Time page.
Figure 7-30 Time Page
2.
Edit the parameters.
Date
The displayed date on the device.
Note
The available range is from 1970.01.01 to 2037.12.31.
Time
The displayed me on the device.
DST
34