HIKVISION DS-k2210 User Manual

Main Elevator Controller User Manual
19
Chapter 6 Web Client Operation
6.1 Overview
6.1.1 Introduction
You can access to the elevator controller via the web browser for remote elevator controller
management. You can control the elevator, check the elevator running status, and configure the
elevator parameters via the web client.
6.1.2 Running Environment
Operating System: Microsoft Windows XP SP1 or later
CPU: Intel Pentium 2.0GHz or later
RAM (Memory): 1G or more
Display: Resolution of 1024 X 768 or higher
Web Browser: Internet Explorer 8.0 or later; Mozilla Firefox 5.0 or later; Google Chrome 18 or later
6.2 Login/Logout Web Client
Before you start:
Make sure the device is activated. For details, refer to 5.1 Activating via Web Client.
6.2.1 Login
Steps:
1. Open the web browser and input the device IP in the address field.
2. Click Enter key on your keyboard to enter the login page.

HIKVISION DS-k2210 Specifications

General

DC input voltage	12 V
Power source type	DC
Housing color	Gray
Relay outputs	5

Weight and Dimensions

Depth	167 mm
Width	105 mm
Height	30 mm