Main Elevator Controller User Manual
76
Or you can click Apply Later to apply the changes later in the Permission interface.
The permission changes include changes of schedule and template, permission settings,
person’s permission settings, and related person settings (including card No., fingerprint, face
picture, linkage between card No. and fingerprint, linkage between card No. and fingerprint,
card password, card effective period, etc).
7.8 Advanced Functions
Purpose:
After configuring the person, template, and access control permission, you can configure the
advanced functions of access control application, such as access control parameters, opening door
with first card etc.
Note: The advanced functions should be supported by the device.
Click icon to enter the following interface.
7.8.1 Access Control Parameters
Purpose:
After adding the access control device, you can configure its access control point (Floor)’s
parameters, and its card readers’ parameters.
Click Access Control Parameters tab to enter the parameters settings interface.
Floor Parameters
Steps:
To Next Page
Loading...
