HIKVISION DS-k2210 User Manual

Main Elevator Controller User Manual
80
7. Click Save button to save parameters.
7.8.3 Open Door with First Card
Purpose:
You can set multiple first cards for one access control point. After the first card swiping, it allows
multiple persons access the door or other authentication actions. The first card mode contains
Remain Open with First Card and Disable Remain Open with First Card.
 Remain Open with First Card: The door remains open for the configured time duration after
the first card swiping until the remain open duration ends.
 Disable Remain Open with First Card: Disable the function.
Note: You can swipe the first card again to disable the first card mode.
Steps:
1. Click Open Door with First Card tab to enter the following interface.
2. Select an access control device from the list on the left.
3. Select the first card mode in the drop-down list for the access control point.
4. (Optional) If you select Remain Open with First Card, you should set remain open duration.
Notes:

HIKVISION DS-k2210 Specifications

General

DC input voltage	12 V
Power source type	DC
Housing color	Gray
Relay outputs	5

Weight and Dimensions

Depth	167 mm
Width	105 mm
Height	30 mm