HIKVISION DS-KD7003EY-IME2

32.5 Link Video Intercom Devices
You can link to indoor staon and set DIP switch.
Steps
1.
Click
on the top right of the web page to enter the wizard page. Aer previous sengs, you
can click Next to enter the Link Video Intercom Devices page.
2.
Hold the
buon on the right side of the device for 10 s to trigger the funcon of device linkage.
Note
The IN USE indicator will be normally on.
3.
Make sure the DIP switch is correct.
4.
Click Complete .
DS-KD7003EY-IME2 Module Door Staon User Manual
94