HIKVISION DS-KD7003EY-IME2

Auto
The camera switches between the day mode and the night mode according to the
illuminaon automacally.
The sensivity ranges from 0 to 7, and the higher sensivity results in the more easily to
trigger the mode switch.
The switch
me refers to the interval me between the day/night switch. You can set it
from 5 sec to 120 sec.
Scheduled-Switch
The camera switches the day mode and the night mode according to the start me and
end
me you set.
Video Standard
Set the video frame rate when performing live view remotely. Aer changing the standard,
you should reboot the device to take eect.
PAL
25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East
countries, Europe countries, etc.
NTSC
30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the
Philippines, etc.
3.
Click Default to restore the parameters to the default
sengs.
19.3 Set OSD (On-Screen Display) on PC Web
You can customize the camera name, me/date format, display mode, and OSD size displayed on
the live view.
Steps
1.
Click Conguraon → Image → OSD Conguraon to enter the sengs page.
2.
Check the corresponding checkbox to select the display of camera name, date or week if
required.
-
Select Display Name: Edit the Camera Name.
-
Select Display Date: Select from the drop-down list to set the Time Format and Date Format.
3.
Drag to adjust the OSD
posion and alignment.
4.
Click Save to enable the sengs.
19.4 Crop Target on PC Web
You can select a target and crop images on the live view.
DS-KD7003EY-IME2 Module Door Staon User Manual
71