HIKVISION DS-KD7003EY-IME2 User Manual

Chapter 23 Upgrade and Maintenance
●
Upgrade and Maintenance on PC Web
●
Upgrade and Maintenance on Mobile Web
23.1 Upgrade and Maintenance on Mobile Web
Restart device and restore device parameters.
Restart Device
Tap
→ Restart .
Tap Restart to restart the device.
Restore Parameters
Tap → Default .
Restore to Default Sengs
The device will restore to the default sengs, except for the device IP address and the user
informaon.
Restore to Factory Sengs
All parameters will be restored to the factory sengs. You should acvate the device before
usage.
Log Export
Tap → Log Export .
Tap Export to export the maintenance log.
23.2 Upgrade and Maintenance on PC Web
Reboot device, restore device parameters, and upgrade device version.
Reboot Device
Click Maintenance and Security → Maintenance → Restart .
Click Restart to reboot the device.
Upgrade
Click Maintenance and Security → Maintenance → Upgrade .
Select an upgrade type from the drop-down list. Click and select the upgrade le from your
local PC. Click Upgrade to start upgrading.
DS-KD7003EY-IME2 Module Door Staon User Manual
80

HIKVISION DS-KD7003EY-IME2 Specifications

General

Brand	HIKVISION
Model	DS-KD7003EY-IME2
Category	Intercom System
Language	English