HIKVISION DS-KD7003EY-IME2

If the device has been connected to Hik-Connect and network, when there is a new installaon
package in Hik-Connect, you can click Upgrade aer Online Update to upgrade the device system.
Note
Do not power o during the upgrading.
Restore Parameters
Click Maintenance and Security → Maintenance → Backup and Reset .
Restore All
All parameters will be restored to the factory sengs. You should acvate the device before
usage.
Restore
The device will restore to the default
sengs, except for the device IP address and the user
informaon.
Import and Export Parameters
Click Maintenance and Security → Maintenance → Backup and Reset .
Device Parameters
Export
Click Export to export the device parameters.
Note
You can import the exported device parameters to another device.
Import
Click and select the le to import. Click Import to start import conguraon le.
Data Migraon
Export
Click Export to migrate user informaon and conguraon details of the device to other
devices.
Note
You can migrate user informaon and conguraon details of the device to other devices.
The informaon and data may include door staon conguraon data, personal informaon,
card informaon, adversement informaon and etc.
Import
Click and select the le to import. Click Import to start import conguraon le.
DS-KD7003EY-IME2 Module Door Staon User Manual
81