HIKVISION DS-KD7003EY-IME2 - Page 22

Figure 3-6 Drill Installaon Hole
2.
Remove the plasc sheet of the cable entry.
3.
Mark the
mounng frame screw holes on the wall.
1) Route the cables through the mounng frame hole.
2) Insert the
mounng frame into the installaon hole.
3) Mark the mounng frame screw holes' posion with a marker, and take out the mounng
frame.
DS-KD7003EY-IME2 Module Door Staon User Manual
11