HIKVISION DS-KD7003EY-IME2 - Page 35

Figure 3-19 Drill the Installaon Hole
2.
Select a cable entry and remove the plasc sheet.
3.
Mark the
mounng frame screw holes on the hole.
1) Routs the cables through the mounng frame hole.
2) Insert the
mounng frame into the installaon hole.
3) Mark the mounng frame screw holes' posion with a marker, and take out the frame.
4.
Drill 4 holes according to the marks on the wall, and insert the expansion sleeves into the screw
holes.
5.
Fix the
mounng frame with 4 expansion bolts.
DS-KD7003EY-IME2 Module Door Staon User Manual
24