HIKVISION DS-KD8003 Series - Intercom Settings

Aer enable the DESFire card content reading funcon, the device can read the DESFire card
No.
6.5.17 Intercom Sengs
Device No. Conguraon
Set the No. of the device, and linked devices can build a communicaon.
Steps
1.
Click Intercom → Device No. to enter the sengs page.
Figure 6-18 Device No. Sengs
2.
Select the device type from the drop-down list, and set the corresponding informaon.
3.
Click Save to enable the device number conguraon.
Note
●
For main door staon (D series or V series), the serial No. is 0.
●
For sub door staon (D series or V series), the serial No. cannot be 0. Serial No. ranges from 1
to 99.
●
For each villa or building, at least one main door
staon (D series or V series) should be
congured, and one sub door staons (D series or V series) can be customized.
●
For one main door staon (D series or V series), up to 16 sub door staons can be congured.
DS-KD8003 Series Module Door Staon User Manual
97