HIKVISION DS-KD8003 Series

4.1 One-Module Installaon
4.1.1 One-Module Surface Mounng
Before You Start
Figure 4-1 Mounng Frame
Note
●
The dimension of one module mounng frame (W × H × D) is: 117 mm × 107 mm × 32.7 mm.
●
The dimensions above are for reference only. The actual size can be slightly dierent from the
theorecal dimension.
Steps
1.
Paste the
installaon Scker 1 onto the wall. Make sure the scker is placed horizontally via
measuring with the gradienter.
2.
Drill 4 holes according to the screw holes on the
scker.
Note
●
The suggested size of hole is 6 (diameter) × 25 (depth) mm.
●
The suggested length of cables le outside is 100 mm.
DS-KD8003 Series Module Door Staon User Manual
19