HIKVISION DS-KD8003 Series

All parameters will be restored to the factory sengs. You should acvate the device before
usage.
Import and Export Parameters
Click Conguraon → System → Maintenance → Upgrade & Maintenance .
Export
Click Export to export the logs or device parameters.
Note
You can import the exported device parameters to another device.
Import
Click and select the le to import. Click Import to start import conguraon le.
Upgrade
Click Conguraon → System → Maintenance → Upgrade & Maintenance .
Select an upgrade type from the drop-down list. Click and select the upgrade le from your
local PC. Click Upgrade to start upgrading.
Note
The upgrading process will be 1 to 10 minutes. Do not power o during the upgrading.
6.5.7 Security Service
Set the security service for logging in the client soware.
On the Device for Management page, click Conguraon → System → Security → Security
Service .
Enable SSH
To raise network security, disable SSH service. The
conguraon is only used to debug the
device for the professionals.
6.5.8 Change Administrator's Password
Steps
1.
Click Conguraon → System → User Management .
2.
Click
.
3.
Enter the old password and create a new password.
4.
Conrm the new password.
5.
Click Save.
DS-KD8003 Series Module Door Staon User Manual
80