HIKVISION DS-KD8003 Series

6.5.13 Image Sengs
Display Sengs
Congure the image adjustment, backlight sengs and other parameters in display sengs.
Steps
1.
Click Image → Display Sengs to enter the display sengs page.
Figure 6-10 Display Sengs
2.
Select the Video Standard.
3.
Select to enable or disable WDR.
Note
Wide Dynamic Range can be used when there is a high contrast of the bright area and the dark
area of the scene.
4.
Set the basic parameters.
Brightness
Brightness describes bright of the image, which ranges from 1 to 100.
Contrast
Contrast describes the contrast of the image, which ranges from 1 to 100.
Saturaon
Saturaon describes the colorfulness of the image color, which ranges from 1 to 100.
DS-KD8003 Series Module Door Staon User Manual
88