HIKVISION DS-KD8003 Series

Note
●
The suggested dimension of installaon hole is 220 (W) × 108 (H) × 45.5 (D) mm.
●
The suggested length of cables le outside is 270 mm.
Figure 4-22 Drill the Installaon Hole
2.
Select a cable entry and remove the plasc sheet.
3.
Mark the gang box screw holes on the hole.
1) Routs the cables through the gang box hole.
2) Insert the gang box into the
installaon hole.
3) Mark the gang box screw holes'
posion with a marker, and take out the gang box.
DS-KD8003 Series Module Door Staon User Manual
36