HIKVISION DS-KH6350-WTE1 User Manual

4. Select the indoor extension that you need to connect. The indoor extension with the same
LAN as the indoor staon will be displayed in the list.
6.
Aer the devices are paired, tap Test. The video intercom will be completed is the devices are
connected properly.
7.
Congure the Hik-Connect service sengs. Aer you enable the funcon, you can control the
video intercom device via the mobile App.
1) Enable Hik-Connect service.
2) Edit
vericaon code or use the acvaon password by default.
3) View Hik-Connect Server Status.
4) Scan the
rst QR Code to download the APP of Hik-Connect. Scan the second QR Code to add
your device to the APP.
Aer adding the device to the APP, you can congure the device
remotely.
5) Tap Next.
Figure 3-6 Hik-Connect Service Sengs
8.
Set me and tap Next.
1) Select the Time Zone.
2) Tap Date Format and Time Format to set the me format, which will displayed on the home
page.
3) Tap Time to set
me manually.
4) Enable DST.Set the DST start
me, end me and bias me.
Network Indoor Staon Conguraon Guide
7

HIKVISION DS-KH6350-WTE1 Specifications

General

Color	Yes
Connectivity technology	Wired & Wireless
Number of displays supported	1
Maximum number of cameras supported	-
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Flash memory	32 MB
Internal memory	128 MB
Alarm input channels	8
Operating system installed	Embedded LINUX
Package weight	683 g
Outdoor unit included	No
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	TFT
Product color	Black
Voice codecs	G.711a, G.711u
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, SIP, RTSP
Power consumption (typical)	8 W

Weight and Dimensions

Depth	21 mm
Width	175 mm
Height	113.5 mm
Weight	355 g