Need help?Do you have a question about the HIKVISION DS-KH6350-WTE1 and is the answer not in the manual?
General| Color | Yes |
|---|---|
| Connectivity technology | Wired & Wireless |
| Number of displays supported | 1 |
| Maximum number of cameras supported | - |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 128 GB |
| Flash memory | 32 MB |
| Internal memory | 128 MB |
| Alarm input channels | 8 |
| Operating system installed | Embedded LINUX |
| Package weight | 683 g |
| Outdoor unit included | No |
| Display diagonal | 7 \ |
| Touchscreen type | Capacitive |
| Display resolution | 1024 x 600 pixels |
| Display technology | TFT |
| Product color | Black |
| Voice codecs | G.711a, G.711u |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | TCP/IP, SIP, RTSP |
| Power consumption (typical) | 8 W |
Weight and Dimensions| Depth | 21 mm |
|---|---|
| Width | 175 mm |
| Height | 113.5 mm |
| Weight | 355 g |
Pair indoor stations and door stations automatically or manually.
Configure network connection, IP address, subnet mask, and gateway.
Set network parameters for linked devices for intercom.
Set station and extension numbers for intercom dialing.
Enable SIP communication, set registration password.
Change admin password using verification code if forgotten.
Change password via email or security questions if forgotten.
Synchronize device time using NTP or manually.
Configure Hik-Connect server parameters and verification code.
Activate, add, edit, and delete devices in the client software.
Manage organizations and persons for video intercom functions.
To Next Page