HIKVISION DS-KH6350-WTE1 User Manual

Note
Indoor extension does not support the ring duraon sengs, call forwarding sengs, or auto-
answer funcon.
3.6.2 Volume Sengs
Set the microphone volume, prompt sound volume, call volume, and enable touch sound.
Steps
1.
Tap
Sengs → → Volume Sengs to enter the volume sengs page.
2.
Set the microphone volume, prompt sound volume, and the call volume. You can also enable
Touch Sound to turn on the key sound.
3.7 Via the mobile client
The device support adding to Hik-Connect and coguraon remotely via the client.
3.7.1 Link to the Mobile Client
Download and link to the mobile client, and you can congure the parameters of the device
remotely via mobile client.
Steps
1.
Tap
Sengs → → Conguraon and enter the admin (acvaon) password to enter the
sengs page.
2.
Tap
to enter the system maintenance page.
3.
Tap Hik-Connect Service Sengs.
Network Indoor Staon Conguraon Guide
32

HIKVISION DS-KH6350-WTE1 Specifications

General

Color	Yes
Connectivity technology	Wired & Wireless
Number of displays supported	1
Maximum number of cameras supported	-
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Flash memory	32 MB
Internal memory	128 MB
Alarm input channels	8
Operating system installed	Embedded LINUX
Package weight	683 g
Outdoor unit included	No
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	TFT
Product color	Black
Voice codecs	G.711a, G.711u
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, SIP, RTSP
Power consumption (typical)	8 W

Weight and Dimensions

Depth	21 mm
Width	175 mm
Height	113.5 mm
Weight	355 g