HIKVISION DS-KH6350-WTE1 User Manual

Note
●
The ring to be imported should be in the wav format, and the size of the ring cannot be larger
than 300k.
●
Up to 4 rings can be added.
Arming Informaon
Click Arming Informaon to enter the conguring arming informaton page and view the arming
informaon.
Figure 4-16 Arming Informaon
Click Refresh to refresh the arming informaon.
Relay
Some indoor staon devices support this funcon.
Click Relay to enter the set relay parameters page.
Select a relay and click "
" and set the relay name and output delay me. Click Save to enable
the sengs.
Click Copy to..., and select a relay you want to copy to. Click Save to enable the sengs.
SIP No.
Sengs
Steps
1.
Click SIP No.
Sengs to enter the sengs page.
Network Indoor Staon Conguraon Guide
57

HIKVISION DS-KH6350-WTE1 Specifications

General

Color	Yes
Connectivity technology	Wired & Wireless
Number of displays supported	1
Maximum number of cameras supported	-
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Flash memory	32 MB
Internal memory	128 MB
Alarm input channels	8
Operating system installed	Embedded LINUX
Package weight	683 g
Outdoor unit included	No
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	TFT
Product color	Black
Voice codecs	G.711a, G.711u
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, SIP, RTSP
Power consumption (typical)	8 W

Weight and Dimensions

Depth	21 mm
Width	175 mm
Height	113.5 mm
Weight	355 g