HIKVISION Hik IP Receiver Pro

Figure 3-5 Batch Link Channels to Mulple Zones
The linked channels are displayed on the alarm service and zone sengs page.
5.
Oponal: Perform the following operaon(s).
Edit Zone Hover the cursor on a zone and click to edit zone name or change the
paron (area) of the zone.
Delete Zone Hover the cursor on a zone and click to delete the zone.
Cancel Linkage
Between Channel
and Zone
Aer selecng a zone, check linked channel(s) on the right and click
Delete to cancel the linkage between channel(s) and the zone. You can
also click in the Operaon column to cancel linkage.
Hik IP Receiver Pro User Manual
17