Check Enable Video Vericaon so that you can view alarm-related videos on the ARC.
Video Vericaon Address
Select Select to select among the PC NIC address and external addresses congured on Hik
IP Receiver Pro. Select Other to enter an address.
Response Timeout Period
It ranges from 5 seconds to 60 seconds, and 20 seconds is the default. If the Hik IP
Receiver Pro dose not receive the response from the ARC in this period, it indicates that no
response has been sent to the Hik IP Receiver Pro.
Aempts
It ranges from one me to 10 mes, and 3 mes is the default. If the Hik IP Receiver Pro
dose not receive the response from the ARC during the response meout period, the Hik
IP Receiver Pro will
aempt to retransmit the message.
Hik IP Receiver Pro Heartbeat Interval
It ranges from 10 to 65535 seconds. It is 30 seconds by default.
Device Heartbeat Interval
It ranges from 10 to 86400 seconds. It is 30 seconds by default.
Note
Used for the device which does not support Periodic Test or whose Periodic Test has not
been enabled. If the Periodic Test of a device has been enabled, the device heartbeat
interval will be the same as that of this device.
Private
Hik IP Receiver Pro Heartbeat Interval
If you select Private as the protocol type, check Enable Hik IP Receiver Pro Heartbeat to
enable heartbeat between theARC and the Hik IP Receiver Pro. It ranges from 10 to 65535
seconds. It is 30 seconds by default.
5.
Click Save.
●
Automaon Status: For Sur-Gard protocol, the status means whether the Hik IP Receiver Pro
can receive data from the ARC, which supports Sur-Gard protocol.
Hik IP Receiver Pro User Manual
41
To Next Page
Loading...
General